The online materials estimator tool is an estimating guide for Unifrax’s FyreWrap® duct and plenum wrap systems. The results will vary depending upon the number of required layers and installation technique (type of joints and overlaps) that will be used. The estimator tool is intended to provide a material estimate to be used for general guidance only.
Material estimates do not consider potential waste due to material off-cuts or material requirements for any required linear 3″ overlaps. The number of pieces available per roll length will significantly impact material requirements. FyreWrap system integrity is limited to the quality of the installation. Additional material estimation charts are available by contacting: firstname.lastname@example.org.