English 
简体中文 
한국어 
Français 
Deutsch 
Italiano 
Español 
Spanish (MX) 
Português FyreWrap® Blanket
FyreWrap® Blanket provides fire protection insulation for a variety of rated assemblies on marine structures and vessels. Thin, lightweight systems combined with a flexible product form result in lower installation costs and significantly reduced weight. This offers builders and owners reduced structure weight, which may yield increased vessel speed, fuel savings and available payloads.
FyreWrap Blanket is used to insulate bulkheads and decks on passenger and vehicle high-speed ferries, cruise ships, commercial and military vessels, and offshore oil platforms. Tested systems are in compliance with U.S. Coast Guard regulations, now defined under IMO Res. A. 754 (18).
Typical applications include:
- Steel bulkheads and decks
- Aluminium bulkheads and decks, including extruded thin plate designs (min. 2 mm thick)
- Vehicle loading areas, engine rooms, storage areas etc.
- Various H-rated offshore structures
- Non-combustible insulation
- Exhaust ducts and pipes
The FyreWrap Blanket provides the following product features:
- U.S. Coast Guard-approved for steel and aluminium structures
- Complies with SOLAS Safety Objectives and IMO FTP Code fire test requirements; Res. A. 754 (18)
- Fire-resisting division for High-Speed Craft (HSC); Res. MSC.45 (65)
- ABS (American Bureau of Shipping)-approved for steel and aluminium structures
- Fire protection structural insulation for bulkheads and decks
- Significantly reduced weight versus mineral wool systems
- Flexible blanket is easy to cut and install
- Contour wrap around multiple stiffeners and beams
- Up to 50% weight reduction over mineral wool and significant installed cost savings
Fire Protection
DocumentsEstimated Temperature
- 1260 °C
Composition
- LBP (low bio-persistent)
Chemistry
- Calcium magnesium silicate
Documents.
FyreWrap® Blanket
Product Information Sheet
Brochure
Global Marine and Offshore Manual
Unifrax manufactures a wide range of high temperature insulating materials especially suited for use in marine and offshore passive fire protection installations. This manual presents our new, improved, systems based on our FyreWrap LT blanket.
Certification
Non‑Combustible Materials: Reaction to Fire Non‑Combustible Rating FyreWrap Blanket
Certification
Module D Quality: Lorette, France MED Quality Approval Rating FyreWrap Products and Systems
Certification
Module D Quality: Rainford, UK MED Quality Approval Rating FyreWrap Products and Systems
Certification
Other: Jet Fire Protection System J60 Rating FyreWrap Blanket
Certification
Non‑Combustible: Reaction to Fire Non‑Combustible Rating FyreWrap SG Blanket
Certification
Non‑Combustible: Reaction to Fire Non‑Combustible Rating FyreWrap WR Blanket
Certification
H‑Class Steel: Bulkhead H120 Rating FyreWrap Blanket
Certification
H‑Class Steel: Deck H120 Rating FyreWrap Blanket
Certification
H‑Class Steel: Deck H60 Rating FyreWrap Blanket
Certification
Aluminium: Bulkhead – Restricted A30 Rating FyreWrap Blanket
Certification
Aluminium: Deck A30 Rating FyreWrap Blanket
Certification
Aluminium: Bulkhead – Restricted A60 Rating FyreWrap Blanket
Certification
Aluminium: Deck A60 Rating FyreWrap Blanket
Certification
A‑Class Steel: Bulkhead – Restricted (Lower Weight Option) A30 Rating FyreWrap Blanket
Certification
A‑Class Steel: Bulkhead A60 Rating FyreWrap Blanket
Certification
A‑Class Steel: Bulkhead – Restricted A60 Rating FyreWrap Blanket
Certification
A‑Class Steel: Deck A60 Rating FyreWrap Blanket
Certification
A‑Class Steel: Bulkhead (Corrugated) A60 Rating FyreWrap Blanket
Certification
A‑Class Steel: Bulkhead (Lower Weight Option) A60 Rating FyreWrap Blanket
Certification
A‑Class Steel: Bulkhead (Lower Weight and Thinner Option) A60 Rating FyreWrap Blanket
Certification
A‑Class Steel: Deck (Lower Weight Option) A60 Rating FyreWrap Blanket