Filtering products by: Coatings/Mixes
Fiberfrax®
Coatings/Mixes
Fiberfrax® Specialties family of products includes Fiberfrax moldables, pumpables, caulks, coating cements, rigidizers, tamping mix, and Moist-Pack blanket. Many of these products contain a wet, inorganic binder to provide both strength and hardness at elevated temperatures
Fiberfrax® LDS and LDS-AL moldables consist of Fiberfrax ceramic fibers dispersed in a sticky water-based refractory binder. These materials have a putty-like consistency which permits application by caulking, troweling, or hand forming.
Fiberfrax® Pumpable-GS Insulating Mix was designed for applications into difficult-to reach areas requiring insulation.
Fiberfrax® Pumpable-LDS Insulating Mix was designed for applications into difficult-to reach areas requiring insulation.
Fiberfrax® QF-150™ coating cements provide a range of consistencies for brush, spray, and trowel-on applications.
Fiberfrax® QF-180™ coating cements provide a range of consistencies for brush, spray, and trowel-on applications.
Fiberfrax® QF-180™ Blue coating cements provide a range of consistencies for brush, spray, and trowel-on application.
Fiberfrax® Silplate® Mass 1500 is a hot face coating material for use over ceramic fiber modules, castables and refractory bricks.
Coatings/Mixes, Furnace Lining Products
Fiberfrax® Topcoat™ 2600 Insulating Mix was designed for application into difficult-to reach areas requiring insulation. Fiberfrax Topcoat 2600 Insulating Mix has a temperature grade rating of 1426°C (2600°F).
Fiberfrax® Topcoat™ 3000 has a temperature grade rating of 1538°C (2800°F). Topcoat 3000 consists of a blend of regular ceramic fibers and high temperature Fibermax® polycrystalline fibers combined with an inorganic binder system.
Fibermax®
Fiberfrax® Topcoat™ M coating cement provides a range of consistencies for brush, spray, and trowel-on application.
Fiberfrax® Vari-Form™ castable materials provide casting mixes which can be applied in small areas such as furnace access and site doors, tube sheets, and as a refractory backup.
Fibermax® Caulk is a high-temperature blend of Fiberfrax® bulk fibers, Fibermax® polycrystalline high-alumina fibers, and inorganic binder.
Fiberstick™ Refractory Cement is a high-temperature, air-setting mortar used as an adhesive to securely bond Fiberfrax Bonded modules and other product forms to refractory surfaces.
Rigidizer™ and Rigidizer™ W, inorganic liquid hardeners, have a temperature grade rating of 1260°C (2300°F).
Silplate® Mass S Coating combines LBP fibers, refractory oxides and Poly Crystalline wool fibers with an inorganic binder system to create a wet mix.