English (UK) 
简体中文 
한국어 
Français 
Deutsch 
Italiano 
Español 
Spanish (MX) 
Português FyreWrap® Elite® 1.5 Duct Insulation – Air Distribution System (ADS) Ducts
FyreWrap® Elite® 1.5 Duct Insulation is a single layer flexible duct wrap enclosure for 1- and 2-hour fire-rated air distribution systems (ADS ducts). Typical duct types include smoke control, hazardous exhaust, laboratory chemical fume, stairwell and vestibule pressurization, ventilation, supply/return ducts, commercial dryer exhaust, as well as refuse and linen chutes. This slim, compact design is an alternate to code prescribed fire-rated shafts and results in significant weight, space and labor savings when compared to traditional shafts.
FyreWrap Elite 1.5 Duct Insulation Air Distribution System (ADS) offers the following features:
- 1- and 2-hour fire-rated enclosure (3 hour available)
- Alternate to fire-rated shaft
- Zero clearance to combustibles at all locations on blanket wrap
- Saves weight, space, labor
- Thin, lightweight single-layer system
- High-temperature, biosoluble insulation
- Durable foil-scrim covering
- GREENGUARD listed for Microbial Resistance
This flexible, fire protection wrap meets the requirements defined by the Mechanical Code and is an alternative to a traditional fire-rated shaft wall enclosure around ducts. It is used to wrap HVAC ducts, stairwell pressurization ducts and smoke extraction ducts and provide critical fire protection and life safety.
Specifications on various FyreWrap® Duct Insulation systems are available in the Product Resource Center.
Fire Protection
DocumentsEstimated Temperature
- 2300°F / 1260°C
Composition
- LBP (low bio-persistent)
Chemistry
- Calcium magnesium silicate
Documents.
FyreWrap® Elite® 1.5 Duct Insulation – Air Distribution System (ADS) Ducts
Product Information Sheet
Certification
Air Distribution System Duct Through Penetration Firestop System‑Horizontal Duct (2 Hour) Test Standard ASTM E814 Design No. UNI PHV 120‑04
Certification
Air Distribution System Duct Through Penetration Firestop System‑Horizontal Duct (3 Hour) Test Standard ASTM E814 Design NO. UNI PF 180‑01
Certification
Air Distribution System Duct Through Penetration Firestop System‑Horizontal Duct (2 Hour) Test Standard ASTM E814 Design No. UNI PHV 120‑03
Certification
Air Distribution System Duct Through Penetration Firestop System‑Vertical Duct (1 Hour) Test Standard ASTM E814 Design No. UNI PV 60‑01
Certification
Air Distribution System Duct Through Penetration Firestop System‑Vertical Duct (2 Hour) Test Standard ASTM E119 Design No. UNI FRD 120‑24
Certification
Air Distribution System Duct Through Penetration Firestop System‑Vertical Duct (2 Hour) Test Standard ASTM E814 Design No. UNI FRD 120‑23
Certification
Air Distribution System Duct Through Penetration Firestop System‑Vertical Duct (2 Hour) Test Standard ISO6944 Design No. UNI FRD 120‑21
Certification
Air Distribution System Duct Through Penetration Firestop System‑Vertical Duct (3 Hour) Test Standard ASTM E814 Design No. UNI PF 180‑02
Certification
Air Distribution System Duct General Installation (2 Hours) Test Standard ISO 6944 Design NO. UNI FRD 120‑01
Certification
Air Distribution System Duct General Installation (2 Hours) Test Standard ISO 6944 Design NO. UNI FRD 120‑15
Certification
Air Distribution System Duct General Installation‑Horizontal Duct (3 Hour) Test Standard ISO 6944 Design NO. UNI DI 180‑01
Certification
Air Distribution System Duct General Installation‑Horizontal Duct (3 Hour) Test Standard ISO 6944 Design NO. UNI DI 180‑02
Drawing
Air Distribution System Ducts: Drawings
Submittal Sheet
FyreWrap Elite 1.5 Duct Insulation Single‑Layer Fire Rated Boiler Flue/Generator Exhaust
Technical Bulletin
Fire Protection: Fire Wrap Systems as Alternative to Fire Rated Shaft Construction