English (UK) 
简体中文 
한국어 
Français 
Deutsch 
Italiano 
Español 
Spanish (MX) 
Português FyreWrap® Elite® 1.5 Duct Insulation – Grease Duct ASTM E2336 System
FyreWrap® Elite® 1.5 Duct Insulation is a two-layer flexible enclosure for two-hour rated commercial kitchen grease ducts. FyreWrap Elite 1.5 Duct Insulation is tested per ASTM E2336 and is acceptable as an alternate to a traditional fire-rated shaft. Installed as a two-layer system, FyreWrap Elite 1.5 complies with the International Mechanical Code (IMC) and Uniform Mechanical Code (UMC).
FyreWrap Elite 1.5 Duct Insulation offers the following product features:
- 2-hour fire-resistance rating
- Alternate to shaft enclosure
- Complies with IMC and UMC
- Tested per ASTM E2336
- Two-layer system; butt joints both layers
- High-temperature, biosoluble insulation
- Zero clearance to combustibles, at any location
- GREENGUARD listed for Microbial Resistance
This flexible fire protection duct wrap meets the requirements defined by the International Mechanical Code (IMC), Uniform Mechanical Code (UMC), and the National Fire Protection Association (NFPA 96), and is an alternative traditional fire-rated shaft wall enclosure around ducts.
Specifications on various FyreWrap® Duct Insulation systems are available in the Product Resource Center.
Fire Protection
DocumentsEstimated Temperature
- 2300°F / 1260°C
Composition
- LBP (low bio-persistent)
Chemistry
- Calcium magnesium silicate
Documents.
FyreWrap® Elite® 1.5 Duct Insulation – Grease Duct ASTM E2336 System
Product Information Sheet
Certification
FyreWrap Grease Duct Fire Penetration Seal Test Standard ASTM E814
Certification
FyreWrap Grease Ducts General Grease Duct Assembly Test Standard ASTM E2336 Design No. UNI/BI 120‑14
Certification
FyreWrap Grease Ducts General Grease Duct Assembly Test Standard CAN/ULC S144 Design No. UNI BI 120‑03
Certification
FyreWrap Grease Ducts: General Grease Duct Assembly Test Standard CAn/ULC S144 Design No. UNI/BI 120‑15
Certification
FyreWrap Grease Ducts: General Grease Duct Assembly Test Standard ASTM E2336 Design No. UNI/BI 120‑02
Certification
FyreWrap Grease Duct: ICC‑ES Evaluating Report Test Standard ESR‑2224
Certification
FyreWrap Grease Duct: Non‑Bearing Wall Test Standard ASTM E119
Certification
FyreWrap Grease Duct: Through Penetration Fire Stop System – Horizontal Duct Test Standard ASTM E814
Drawing
FyreWrap Grease Duct Drawings
- Grease-Exhaust-Ducts-General-Installation-Detail.pdf
- Grease-Exhaust-Ducts-Through-Penetration-Firestop-Systems-Floor-Ceiling.pdf
- Grease-Exhaust-Ducts-Through-Penetration-Firestop-Systems-Wall.pdf
- Grease-Exhaust-Ducts-Typical-Duct-Support-Details.pdf
- Grease-Exhuast-Ducts-Access-Door-System.pdf
- Grease-Exhuast-Ducts-Throuhg-Penetration-FireStop-System.pdf
Specification
FyrewWrap Grease Ducts Specifications
Technical Bulletin
Fire Protection: Fire Wrap Systems as Alternative to Fire Rated Shaft Construction